Tonecraft Tokyo — VST3 / AU Plugin

KICKGRAFT / KICKGRAFT Pro

User Manual — v1.0.0

Official website ↗
Gumroad ↗

KICKGRAFT is a drum instrument made only for kicks. It plays the head of your own kick sample (the moment the beater hits) and grafts it onto a synthesized body and sub. The attack keeps the sample’s character, while the pitch and length of the low end are made to fit your song. Your dominant foot (MAIN FOOT) and your other foot (SUB FOOT) are separate keys, so double-kick parts sound natural. It comes as the free KICKGRAFT and as KICKGRAFT Pro, which adds FLUX controls, every EDIT page control, pattern export as WAV and aux outputs. They install as separate plugins, so you can keep both. This manual covers both; the Pro features are gathered in “4. Pro features”.

No samples are included. It plays from its synth (BODY / SUB / BEATER) from the start.

Free vs Pro

Feature Free Pro
FLUX Fixed at 25 (the variation display still moves) FLUX + STRENGTH / POSITION / DRIFT
EDIT page Only BEATER SNAP, SUB FOOT and TIMING can be changed (the rest plays at the preset’s or session’s values) Everything
Pattern export Drag as MIDI + drag as WAV
Aux outputs None SUB / TOP + TRIGGER for sidechain
Factory presets 16 20 (+ 4 HUMAN)
User presets Load saved presets and preset files + save, delete and export to files

1. Quick start

  1. Insert KICKGRAFT (or KICKGRAFT Pro) on an instrument track in your DAW.
  2. Play C1. The MAIN FOOT kick sounds. B0 is SUB FOOT. You can also click the keys on screen.
  3. Step through the factory presets (16 in the free edition, 20 in Pro) in the preset bar at the top to find a sound close to what you want.
  4. Drop a kick WAV on the waveform box in the KICK panel. Its head is grafted onto the synth body.
  5. Choose a pitch with TUNE that fits your song’s key. The note name is shown inside the knob.
  6. Hold one of the keys C3 to B3 (default) and that key’s kick pattern plays in time with the tempo.

KICKGRAFT varies a little with every hit (FLUX). The same place in the song always plays back the same, so a bounce sounds exactly like what you heard. The free edition plays it fixed at 25; in Pro, adjust the amount and character with the FLUX knob and STRENGTH / POSITION / DRIFT.

2. The screen

At the top are the MAIN and EDIT tabs. The keys at the bottom are available on both tabs. At the top right you can choose the window size: 60 / 70 / 80 / 90 / 100 %. A new window opens at 100 % (or at the largest size that fits your screen), and the size you choose is kept on that computer. Hover over a control to see its description in the bar at the top (in Japanese or English, following your OS display language).

Next to the logo are the version number and two links: Manual (opens the latest version of this manual on the official site) and Feedback (opens a form for impressions, bug reports and requests).

Preset bar (top)

  • Choose with the arrows, or click the preset name to open the list. A newly inserted instance opens with the first preset, “INIT / DEFAULT”.
  • Both editions load saved user presets and preset files. Saving, deleting and exporting are Pro only.
  • The chosen preset’s name is kept in your session. If you move a knob after loading a preset, * appears after its name.
  • Presets do not contain the sample. Replacing the sample does not add *.

MAIN page

  • KICK: the basics of the kick.
    • The box on the left shows the waveform of the last hit. The sample’s part is drawn yellow and the synth body blue; where one hands over to the other (the seam), a white line and its value are shown. The dotted line shows the body’s pitch falling, and you can shape it by dragging on the box: up / down changes PUNCH (how far it falls), left / right PITCH T (how fast). Drop a kick WAV on this box to load it, and remove it with the × at the top right. Drag the white line left or right to move the seam (GRAFT), and the right edge of the pale band after it to change how long the sample and the body overlap (XFADE; Pro).
    • TUNE: the pitch of the kick. The body and the sub sound at this pitch. The note name is shown inside the knob and the frequency under it.
    • DECAY: the length of the kick.
    • PUNCH: how far above the note the pitch starts at the moment of the hit. Higher values give a tighter, punchier “doom”.
    • GRAFT: where the sample hands over to the synth body (0 to 200 ms). At the far right, FULL plays the sample to its end and the body and sub stay silent. Without a sample the knob is shown dim and does not change the sound.
    • SUB: the level of the sub, which sounds at the TUNE pitch.
    • CLICK: the level of the beater’s click.
    • KEY SNAP: holds TUNE to semitones. Turn it off to tune between semitones.
    • ALIGN: lines up the body’s phase with the sample at the crossfade so the low end does not cancel itself out.
    • Under KEY SNAP / ALIGN, the pitch found in the loaded sample and how it is matched to TUNE are shown.
  • BODY: the six knobs right under the waveform box shape the synth body: how fast the pitch falls (PITCH T), the shape of the fall (CURVE), how round or hard the waveform is (SHAPE), saturation (DRIVE), attack (ATTACK) and level (LEVEL). Turning PITCH T or CURVE changes the dotted line in the box as you go. S plays the body alone.
  • FLUX / WEAR:
    • FLUX: how much each hit varies. STRENGTH / POSITION / DRIFT set its character (“4. Pro features”). The seven bars below show what varied, and how much, on the last hit.
    • WEAR: how much the drum head wears in as you keep playing. SPAN and RESET ON STOP are explained in “3. Parameters in detail”.
  • PHRASE: the kick patterns on the 12 keys (“3. Parameters in detail”).
  • OUTPUT: the four knobs DRIVE / TILT / ROOM / OUT. The rest are on the EDIT page.
  • KEYS: the role of each key is shown above it.
    • B0 / C1: SUB FOOT and MAIN FOOT, one hit each. Click near the top of a key for a softer hit and near the bottom for a harder one.
    • C2 to B2 (TUNED): plays the kick two octaves below the key. You can play a bass line with the kick.
    • The 12 PHRASE keys: the 12 keys of the octave chosen in ZONE (C3 to B3 by default) play patterns.
    • C#1 to B1 and the other keys do nothing.

EDIT page

Click the EDIT tab to switch to the page for detailed sound design. In the free edition only BEATER SNAP, SUB FOOT and TIMING (FLUX SETUP) can be changed; the other knobs play at the preset’s and session’s values (Pro: everything).

  • BODY / SUB / BEATER: the three synth layers. BODY is the shell tone whose pitch falls, SUB is the low end at the TUNE pitch, and BEATER is the short click of the beater. Press S on a panel to hear that layer alone (not saved).
  • SAMPLE: the grafted sample’s start, pitch, brightness, attack, seam length and level, plus REVERSE / ALIGN / AUTO-TUNE / SOLO / EMBED.
  • RESO: the resonance of the front head. The meter at the top right shows how loud it is.
  • FLUX SETUP: how the variation is decided (REPEAT), how timing is handled (TIMING) and the seed for all variation (SEED).
  • OUTPUT DETAIL: attack and sustain emphasis, low cut, presence band, room size, velocity response and more.

3. Parameters in detail

MAIN FOOT, SUB FOOT and TUNED

  • MAIN FOOT (C1): your dominant foot. It plays the KICK panel’s sound as it is.
  • SUB FOOT (B0): the same kick played with the other foot. The three SUB FOOT sliders on the EDIT tab set the level, timing and beater difference from MAIN FOOT.
  • TUNED (C2 to B2): the kick at the pitch two octaves below the key (C2 plays C0). Apart from the pitch it is the MAIN FOOT kick. While you hold the key, the note name inside TUNE changes to that key’s pitch.
  • A kick is one drum: a new hit quickly takes over from the one before. Hits never stack into chords.

Grafting a sample (GRAFT)

Drop an audio file (wav / aiff / flac / mp3) on the waveform box in the KICK panel to load it. Up to 3 seconds are loaded; longer files are cut at 3 seconds (the box says so). The sample plays from its head up to the GRAFT point, and from there the synth body and sub take over.

  • AUTO-TUNE … on load, finds the sample’s pitch and, if it is clear, retunes the sample to the TUNE pitch. When the pitch is unclear, or more than an octave away, the sample is not retuned.
  • XFADE (EDIT) … how long the seam takes to hand over from the sample to the body.
  • REVERSE (EDIT) … plays the sample backwards.
  • EMBED (EDIT) … stores the sample inside the session. When off, only where the file is gets stored.

FLUX

Variation between hits. As with a real drummer, how hard each hit is, where the beater lands and the timing drift all vary. With them, the pitch, length, brightness, level, attack, timing and beater click change a little. Hits off the centre of the head have less body and more beater. The same place in the song always plays back the same.

WEAR / SPAN / RESET ON STOP

The head wears in as you keep playing: the pitch drops a little, the beater click gets harder and louder, and the resonance grows. SPAN is the number of bars until the change is complete. It follows the position in bars, not the time elapsed, so the same place plays the same sound even if you move the playhead. With RESET ON STOP on, the change starts over when playback stops.

PHRASE

Each of the 12 keys holds one kick pattern. While you hold a key, its pattern plays in time with the tempo.

  • 12 patterns: FOUR ON FLOOR / ROCK 8 / HALF TIME / FUNK 16 / BREAKBEAT / 2-STEP / TRAP / DnB / DOUBLE 16 / DOUBLE TRIPLET / GALLOP / BURST. The last four are double-kick patterns that alternate MAIN FOOT and SUB FOOT.
  • RANDOM … draws new patterns for the keys that are not locked. Each pattern keeps its style (length, grid, use of the feet); the added notes and accents change.
  • LOCK … keeps the pattern you played last. Press again to release.
  • ENABLE / LOOP … with ENABLE off, the 12 keys do nothing. With LOOP on, a pattern repeats while the key is held.
  • QUANTIZE … SYNC (default) runs the pattern with the song and joins it where the song is. OFF starts the moment you press; 1/16, 1/8 and BAR start from the pattern’s top at the next 16th, 8th or bar.
  • ZONE … the octave that holds the 12 keys (C3 / C4 / C5).
  • SWING / DYN … how far the 16th offbeats are pushed late (FUNK 16 / BREAKBEAT / 2-STEP), and how much the pattern’s accents vary (at 70 % DYN, as written).
  • Export … choose MIDI or WAV (WAV is Pro only), then drag a pattern key, or the pattern name box, onto a DAW track. The name box gives the pattern you played last.

OUTPUT knobs (MAIN page)

  • DRIVE … saturates the kick for more density.
  • TILT … tilts the overall tone brighter or darker.
  • ROOM … how much room sound is mixed in.
  • OUT … the final output level.

EDIT page parameters

  • SUB FOOT … three sliders set how the other foot (B0) differs from MAIN FOOT (C1): LEVEL (level difference), TIMING (how much later or earlier it lands) and BEATER (how much more or less beater click it has). Usable in the free edition too.
  • SUB … length (DECAY, as a multiple of the MAIN DECAY, so turning DECAY stretches the sub in proportion), harmonics that help small speakers show the low end (HARM), starting phase (PHASE) and level (LEVEL).
  • BEATER … beater hardness (SNAP: soft to hard, brighter click as it rises), length (DECAY) and level (LEVEL).
  • SAMPLE … start position (START), pitch (PITCH, added on top of AUTO-TUNE), brightness (TONE; centre leaves it untouched), attack (ATTACK), seam length (XFADE) and level (LEVEL).
  • RESO … how much the front head resonates (AMOUNT), hits softer than this do not ring the head (THRESH), the pitch of the resonance (TUNE, in semitones from TUNE) and the size of the head’s port hole (PORT; bigger lets the ring die sooner and tightens the low end).
  • FLUX SETUP … REPEAT decides how the variation is set: LOCKED is the same every time, EVOLVE changes bar by bar, FREE is new every hit. TIMING chooses STUDIO (variation both earlier and later) or LIVE (for playing in real time). SEED is the seed for all variation; roll the dice for a new one. When the transport is not playing, every hit is drawn anew whatever REPEAT says (NO TRANSPORT lights).
  • OUTPUT DETAIL … attack and sustain emphasis (ATTACK / SUSTAIN), low cut (LOW CUT; OFF cuts nothing), the presence band and its amount (PRES FREQ / PRES GAIN), room size and the delay before the room starts (ROOM SIZE / PRE-DELAY), and velocity response (VEL CURVE / VEL>TONE / VEL>CLICK).

4. Pro features

FLUX controls

Besides the FLUX knob that sets the overall amount, three knobs set the character of the variation.

  • STRENGTH: variation of how hard each hit is. Harder hits are louder, brighter and sharper in attack.
  • POSITION: variation of where the beater lands. The further off centre, the less body and the more beater click, with small changes in pitch and length.
  • DRIFT: timing that rushes and drags, moving slowly across beats.

20 factory presets

The four in the “HUMAN” category, which make full use of FLUX, are Pro only. The 16 shared with the free edition have the same numbers and sound the same in both editions (the free edition plays them at FLUX 25).

EDIT page controls and user presets

Every parameter on the EDIT page is yours to shape the sound. Save and delete your sounds as user presets from the preset bar, or export them to files (.kickgraft). Exported files can be imported in the free edition too.

Pattern export as WAV

Choose WAV in the PHRASE panel and drag a pattern key onto a DAW track to get one cycle of the pattern as one WAV file of the full mix. It is 32-bit float stereo and runs until the tail has died away. It matches playing the same pattern from the top of a bar in your DAW.

Aux outputs and TRIGGER for sidechain

  • The main output carries the full mix. In addition there are three stereo aux outputs.
    • SUB … only the sub’s low end, for processing the low end on its own.
    • TOP … the sample, body, beater and resonance.
    • TRIGGER … a short pulse of fixed size every time a kick starts. Feed it to the sidechain of a compressor on the bass to duck the bass with the kick. Velocity and knobs never change its size, so the ducking does not vary from hit to hit. SUB FOOT, TUNED and PHRASE hits send it too.
  • The OUTPUT panel effects (DRIVE / TILT / ROOM and so on) are not applied to the aux outputs. Use the main output when you need the sound through those effects.
  • To use TRIGGER for sidechain: enable the TRIGGER output of KICKGRAFT Pro in your DAW and send it to the sidechain input of the compressor on the bass track. Mute the TRIGGER track itself, or turn it down, so the pulse is not heard.

5. Recommended settings

If in doubt, start from a factory preset category.

  • INIT … the starting sound. Build from here.
  • ROCK … acoustic-style kicks with a ringing shell.
  • METAL … hard kicks with the beater in front. Each hit stays clear in fast double-kick parts.
  • 808 … kicks with a long sub. Good for playing bass lines on the TUNED keys.
  • HIPHOP / EDM / POP … kicks for programmed music.
  • JAZZ … soft beaters and a front head that rings.
  • LO-FI … saturated and muffled; it wears in as you play.
  • FX … effect-like sounds, from long falling drops to sharp short zaps.
  • HUMAN (Pro only) … variation like a drummer playing.

Not sure how to start a kick? Load a kick sample you like, set GRAFT short (10 to 30 ms) and match TUNE to your song’s key.

6. Requirements

Item Details
OS Windows 10 / 11 x64, macOS 11 or later (Apple Silicon / Intel)
Format Windows: VST3 / Mac: VST3, AU (instrument)
Host DAWs that support VST3 or AU
Included samples None (plays from its synth)
Outputs One stereo main output + three stereo aux outputs (SUB / TOP / TRIGGER)

7. Installation and uninstallation

The free KICKGRAFT and KICKGRAFT Pro install as separate plugins, so you can keep both. The steps below use the Pro file names; the free edition’s are KICKGRAFT.vst3 / KICKGRAFT.component.

Installation (Windows)

  1. Extract the ZIP.
  2. Copy the whole KICKGRAFT Pro.vst3 folder to:
    C:\Program Files\Common Files\VST3\
  3. Launch your DAW and rescan plugins.

Installation (Mac)

  1. Extract the ZIP.
  2. Copy KICKGRAFT Pro.vst3 to ~/Library/Audio/Plug-Ins/VST3/ and KICKGRAFT Pro.component to ~/Library/Audio/Plug-Ins/Components/ (~ is your home folder; in Finder use Go > Go to Folder and paste the path. Create the folder if it does not exist).
  3. Open Terminal (Applications > Utilities > Terminal), paste the following three lines one at a time and press Return after each.
    cd ~/Library/Audio/Plug-Ins
    xattr -dr com.apple.quarantine "VST3/KICKGRAFT Pro.vst3"
    xattr -dr com.apple.quarantine "Components/KICKGRAFT Pro.component"
  4. Launch your DAW and rescan plugins (copying while the DAW is running may not take effect).

If nothing is printed, it worked. Without this, macOS says the plugin “is damaged and can’t be opened” or “cannot be verified”, and the DAW will not load it. The command only removes the mark macOS puts on downloaded files. Run it again after reinstalling for an update.

Uninstallation (Windows)

Delete C:\Program Files\Common Files\VST3\KICKGRAFT Pro.vst3.
To remove your saved user presets as well, also delete %APPDATA%\Kickgraft\Presets.

Uninstallation (Mac)

Delete KICKGRAFT Pro.vst3 and KICKGRAFT Pro.component.
To remove your saved user presets as well, also delete ~/Library/Kickgraft/Presets.

8. Troubleshooting

  • The plugin does not appear in the DAW
    • [Windows] Check that you copied it to Common Files\VST3 and that your DAW scans that folder.
    • [Mac] Check the destinations (VST3: ~/Library/Audio/Plug-Ins/VST3/, AU: ~/Library/Audio/Plug-Ins/Components/), that you ran the Terminal commands, and rescan in your DAW. If the AU does not appear in Logic Pro and similar hosts, restart your Mac.
  • A SmartScreen warning appears on first use (Windows)
    • This is because the software is not code-signed. Choose “More info” and then “Run anyway”.
  • On Mac it says “is damaged and can’t be opened” or “cannot be verified”
    • Run the Terminal commands in the Mac steps of “7. Installation and uninstallation”.
  • Keys other than the assigned ones make no sound
    • That is by design. Single hits are on B0 (SUB FOOT) / C1 (MAIN FOOT) / C2 to B2 (TUNED); patterns are on the 12 keys of the octave chosen in ZONE (C3 to B3 by default).
  • Turning GRAFT changes nothing
    • Without a sample, GRAFT has no effect (the knob is shown dim). Drop a kick WAV on the waveform box in the KICK panel.
  • The sample’s pitch does not match
    • Check that AUTO-TUNE is on in the SAMPLE panel on the EDIT page. Under KEY SNAP / ALIGN in the KICK panel you can see whether the sample’s pitch was found. For samples without a clear pitch, match it by hand with PITCH in the SAMPLE panel (Pro only).
  • Patterns do not play
    • Check that ENABLE is on in PHRASE, and that the notes you send are in the ZONE octave (C3 to B3 by default).
  • The bounce sounds different from what I heard
    • Check that REPEAT is not FREE. LOCKED and EVOLVE follow the playback position, so the same place always sounds the same.
  • It feels late when I play in real time
    • Set TIMING in FLUX SETUP on the EDIT page to LIVE.
  • Dragging a pattern gives nothing
    • Drag from a pattern key (or the pattern name box) onto a DAW track. The MIDI / WAV buttons in the PHRASE panel only choose the format; dragging them gives nothing. The name box gives the pattern you played last, or the first pattern if you have not played one yet.

9. Notes

KICKGRAFT (free)

  • This product is distributed free of charge (freeware) as-is, without support.
  • The source code is closed source.
  • The copyright of this product belongs to Tonecraft Tokyo.
  • Modification, reverse engineering, redistribution, and resale are prohibited. Please download it only from the official Tonecraft Tokyo website or the store pages it links to.
  • Free to use for both commercial and non-commercial purposes.
  • This product uses JUCE.
  • This product uses JetBrains Mono and Noto Sans JP (SIL Open Font License 1.1).

KICKGRAFT Pro

  • No support is provided. The product is sold as is.
  • No refunds.
  • The source code is closed source.
  • The copyright of this product belongs to Tonecraft Tokyo.
  • Redistribution, resale, modification and reverse engineering are prohibited.
  • For use by the purchaser only. Do not transfer or share it.
  • This product uses JUCE.
  • This product uses JetBrains Mono and Noto Sans JP (SIL Open Font License 1.1).

10. Disclaimer

  • This product is provided “AS IS”, without warranty of any kind, express or implied, including but not limited to merchantability, fitness for a particular purpose, and non-infringement of third-party rights.
  • Tonecraft Tokyo is not liable for any damages arising from the use of, or inability to use, this product, including but not limited to loss or corruption of project files or audio data, equipment malfunction, lost working time, or lost profits.
  • Operation is not guaranteed for every combination of DAW, operating system, and hardware.
  • Specifications may change, and the product may be discontinued, without notice.
  • Use this product at your own risk. Back up your projects before important work.